Congratulations! You’ve successfully installed SecureDrop.
At this point, the only person who has access to the system is the administrator. In order to grant access to journalists, you will need to do some additional setup for each individual journalist.
In order to use SecureDrop, each journalist needs two things:
A Journalist Tails USB.
The Journalist Interface is only accessible as an authenticated Tor Hidden Service (ATHS). For ease of configuration and security, we require journalists to set up a Tails USB with persistence that they are required to use to access the Journalist Interface.
Access to the Secure Viewing Station.
The Journalist Interface allows journalists to download submissions from sources, but they are encrypted to the offline private key that is stored on the Secure Viewing Station Tails USB. In order for the journalist to decrypt and view submissions, they need access to a Secure Viewing Station.
Determine access protocol for the Secure Viewing Station¶
Currently, SecureDrop only supports encrypting submissions to a single public/private key pair - the SecureDrop Submission Key. As a result, each journalist needs a way to access the Secure Viewing Station with a Tails USB that includes the submission private key.
The access protocol for the Secure Viewing Station depends on the structure and distribution of your organization. If your organization is centralized and there are only a few journalists with access to SecureDrop, they should be fine with sharing a single Secure Viewing Station. On the other hand, if your organization is distributed, or if you have a lot of journalists who wish to access SecureDrop concurrently, you will need to provision multiple Secure Viewing Stations.
Create a Journalist Tails USB¶
Each journalist will need a Journalist Tails USB and a Journalist Workstation, which is the computer they use to boot their Tails USB.
To create a Journalist Tails USB, just follow the same procedure you used to create a Tails USB with persistence for the Admin Tails USB, as documented in the Tails Setup Guide.
Once you’re done, boot into the new Journalist Tails USB on the Journalist Workstation. Enable persistence and set an administrator password before continuing with the next section.
Set up automatic access to the Journalist Interface¶
Since the Journalist Interface is an ATHS, we need to set up the Journalist Tails USB to auto-configure Tor just as we did with the Admin Tails USB. The procedure is essentially identical, except the SSH configuration will be skipped, since only Administrators need to access the servers over SSH.
Copy the files
the Admin Workstation via the Transfer Device. Place these files
~/Persistent/securedrop/install_files/ansible-base on the
Journalist Workstation, and the
tool will automatically use them.
Do not copy the files
to the Journalist Workstation. Those files grant access via SSH,
and only the Admin Workstation should have shell access to the
Since you need will the Tails setup scripts (
you used to Configure the *Admin Workstation* Post-Install, clone (and verify) the SecureDrop
repository on the Journalist Workstation, just like you did for the Admin
Workstation. Refer to the docs for cloning the SecureDrop
repository, then return here to
continue setting up the Journalist Workstation.
Once you’ve done this, run the install script to configure the shortcuts for the Source and Journalist Interfaces:
If you did not copy over the
files from the Admin Workstation, the script will prompt for the information.
Make sure to type the information carefully, as any typos will break access
for the Journalist Workstation.
Once the script is finished, you should be able to access the Journalist Interface. Open the Tor Browser and navigate to the .onion address for the Journalist Interface. You should be able to connect, and will be automatically taken to a login page.
Add an account on the Journalist Interface¶
Finally, you need to add an account on the Journalist Interface so the journalist can log in and access submissions. See the section on Adding Users in the Administrator Guide.
Import GPG keys for journalists with access to SecureDrop to the SVS¶
While working on a story, journalists may need to transfer some documents or notes from the Secure Viewing Station to the journalist’s work computer on the corporate network. To do this, the journalist should re-encrypt them with their own keys. If a journalist does not already have a personal GPG key, they can follow the same steps above to create one. The journalist should store the private key somewhere safe; the public key should be stored on the Secure Viewing Station.
If the journalist does have a key, transfer their public key from wherever it is located to the Secure Viewing Station, using the Transfer Device. Open the file manager and double-click on the public key to import it.
Verify Journalist Setup¶
Once the journalist device and account have been provisioned, then the administrator should run through the following steps with each journalist to verify the journalist is set up for SecureDrop.
The journalist should verify that they:
- Have their own Journalist Tails USB that they have verified they are able to boot on the Journalist Workstation.
It is important that they test on the same Journalist Tails USB and the same Journalist Workstation they will be using on a day to day basis. Issues may arise due to differences in USB drives or laptop models.
- Verify they are able to decrypt the persistent volume on the Journalist Tails USB.
- Ensure that they can connect to and login to the Journalist Interface.
- Ensure that they have a Data Transfer Device with a saved passphrase.
- Verify they have access to the Secure Viewing Station they will be using by plugging in the SVS USB, booting, and verifying they can decrypt the persistent volume.
Again, it is important that they test on the same SVS Tails USB and the same Secure Viewing Station they will be using on a day to day basis.
- Verify the submission private key is present in the Secure Viewing Station persistent volume by clicking the clipboard icon in the top right corner of the Tails desktop and selecting “Manage Keys”. When clicking “GnuPG keys” the key should be present.
The journalist should have all the credentials used in this checklist saved in the KeePassX database stored in the persistent volume of the Journalist Workstation.
At this point, the journalist has verified they have the devices and credentials they need and can proceed to a walkthrough of the entire SecureDrop workflow.